Players of the refractory industry from all over the world will get together again in Aachen, Germany for the traditional International Colloquium on Refractories 2018. The event starts Wednesday, 26th September with the Opening Session.
At 11.15 am Chris Parr, S&T Director of Imerys Aluminates will address the topic about “Regional influences and challenges for sustainable refractory raw material selection” in the Europa Saal auditorium whereas at 3.15 pm Phil Edwards, Imerys Aluminates’ Refractory Market Director will present the new division which came to being per the combination of 2 majors French players of the refractory market: former Imerys Refractory Minerals and Kerneos. Feel free to join K3 conference room on first floor.
During the event, Imerys Aluminates will occupy notable space to make it easy for our customers to reach out for our technical and sales teams. On our booth number 7 visitors may discover the new visual identity of the brands. For the comfort of our guests we preview a lounge space with easy to use laptop work possibilities.
The hospitality room, right at the entrance of the Eurogress Center, is designed to offer confidential space for business meetings. Customers should take notice that. Mrs Nehlsen is in charge of the welcome desk. Feel free to call on her for any help.
From power generation to cement cyclones and coolers, steel ladle covers to petrochemical plants, the balance between minimizing energy loss while maintaining high strength and volume stability in applications above 1300C inevitably means making a tradeoff between a two component lining or accepting high heat losses. Traditional light-weight materials based on vermiculite, cenospheres or other light-weight aggregates typically suffer from needing high cement contents and high water demand to allow for good casting properties. The trade-off is extreme shrinkage when put in use above 1300C or alternatively very poor wear resistance, forcing alternative solutions that are not optimized for thermal efficiency.
Can you imagine a light weight aggregate that allows you to produce a range of castable formulations that can have a similar ultimate refractoriness to the benchmark MULCOA® 47?
To understand the performance, the first step is to understand the production process of typical light weight aggregate. Density is linked to the true density and porosity of a material, so to create a light weight chamotte, you simply add pores. However, it is the internal structure of these pores that limit suitability for monolithic applications as they have a very high proportion of open porosity and this leads to large water demands and an aggregate and final product that typically low crushing strength.
Introducing MULCOA® 43LW, not just your average lightweight material. Using a proprietary industrial process, Imerys Aluminates are able to create a refractory aggregate that seals a high proportion of the open porosity leaving a high strength refractory aggregate that has an improved insulative behavior but is still suitable for a range of monolithic applications.
Capable of being used in low-cement castables, pumping grades, dry and wet gunning grades and high strength insulation grades and suitable for use in products rated to 1450C and beyond, MULCOA 43LW based castables maintain hot strengths compared to equivalent alumina products while lowering density, thermal conductivity and maintaining CO resistant behavior.
Offering the opportunity in specifically adapted castables to reduce surface temperatures and increase thermal efficiency, MULCOA® 43LW opens possible new lining concepts to better meet the changing needs of modern refractory applications giving refractory lining designers the chance to save time or reduce risk via new solutions.
For more information on MULCOA® 43LW contact your local Imerys Aluminates contact or visit us at Ceramitec 2018 on booth 209/310 in Hall A6.
Next Wednesday, March 7th IREFCON 18 will open its doors for the 12th India International Refractories Congress to share information, refractory experts experiences and ideas, to learn and to update the refractory industry in as many aspects of refractories development and applications as possible. Our refractory experts will of course attend this major Indian event and contribute with two technical works.
March 8th at 2 pm, Dr. Danilo Frulli, will lecture “Natural and synthetic aluminas and aluminosilicates: properties and characteristics of the main classes of refractory raw materials”.
March 9th at 3.30 pm Florian Ahouanto will present “Andalusite based raw materials for refractory castables: properties and application”
The two speakers, as well as Ananth Nonavinakere and Dirk van den Heever shall be very pleased to answer any questions you may want to address during the event.
This biannual conference is organized by IRMA, the Indian Refractory Makers Association which is the national organization for the refractory manufacturing companies in India. It currently has 75 manufacturing units in its membership which produce a wide range of insulating, abrasion-resistant and corrosion-resistant refractories, ranging from firebricks, insulating refractories to a wide variety of high alumina, silica, magnesite and specialty refractories.
IREFCON 2018 takes place at the well-known Hotel Vivanta by Taj – Dwarka New Delhi, Sector 21 Metro Station Complex, Dwarka, New Delhi.
Today, the 2017 results for the Imerys Group have been commented on by Gilles Michel, our CEO, to the financial community. During this communication, he announced the creation of a new division resulting from the combination of the Refractory Minerals and Kerneos divisions: Imerys Aluminates!
In turn, I am pleased to announce the birth of our division, «Imerys Aluminates», one of the Group’s twelve divisions. Imerys Aluminates!
Firstly, it is under this name that the smart alignment I have been talking about over the past months will be achieved;
Secondly, under this name that we will, together, combine the skills of over 2,350 professionals;
Thirdly, under this name we will together strengthen our expertise, to better serve our customers and support our growth through geographic development and innovation.
Imerys Aluminates: It’s not only our name, it’s also a unified management frame that will drive and direct the legal entities forming Refractory Minerals and Kerneos, without changes to your employment conditions or contracts. Each
company therefore retains its legal autonomy, as is the usual case within Imerys Group divisions. A deployment plan for this new name is currently being prepared. It will be soon communicated to properly structure this change of identity and its impact on our various internal and external communications.
To conclude this short message, I wish to express once again my enthusiasm and my conviction that this combination of Imerys Refractory Minerals and Kerneos is a great opportunity for all of us and for our customers: we are complementary and together we will be even better !
14th edition of International Exhibition on Foundry Technology, Equipment, Supplies, Services will open tomorrow! Come and meet us on our stand L05 in hall 9 during the two days of the event. Philippe Diaz, our foundry expert from France and Arpan Shah, our foundry sales manager India shall be happy to welcome you. Take time to discover a major new product we present at the fair: Kersand 100-400, a new refractory sand our laboratory designed as an alternative material for massive casting in iron and steel. The product matches all foundry requirements.
Over the years IFEX has emerged as the most important platform for the foundry industry of the Indian Sub-Continent. IFEX with its rotational policy to organize the fair in different zones of India (North, South, East & West) on a pre-defined cycle helps its exhibitors to reach their potential customers from all over the country.